Back to Blog

Pre-Settlement Inspections in Victoria: What Should You Look For?

June 11, 2026
image about Pre-Settlement Inspections in Victoria: What Should You Look For?

You’ve signed the real estate contract, organised your finance and are counting down the days until settlement. Before you get the keys, however, there is one important step you shouldn’t overlook: the pre-settlement inspection.

It is easy to assume that once a contract has been signed, everything will run smoothly until settlement. Unfortunately, that is not always the case. Damage can occur, fixtures can disappear and vendors sometimes leave behind unwanted furniture or rubbish.

A pre-settlement inspection gives you the opportunity to check the property before settlement takes place and raise any concerns while there is still time to address them.

When can you inspect the property?

In Victoria, the standard Victorian Contract of Sale generally permits the purchaser and/or another person authorised by the purchaser to inspect the property at any reasonable time during the 7 days preceding and including the settlement date. This right arises from the terms of the contract.

In practice, the inspection is usually arranged through the real estate agent a few days before settlement. We recommend arranging it as close to settlement as reasonably possible, while allowing enough time to deal with any problems that may arise.

Don’t leave it until the morning of settlement if you can avoid it. If you discover an issue, you want your conveyancing representative (licensed conveyancer or conveyancing lawyer) to have time to contact the vendor’s representative and work out how it should be dealt with.

What should you look for?

The inspection is not intended to be another building inspection. Rather, it is an opportunity to make sure the property is in the condition required under your contract including any applicable general and special conditions and that the vendor has complied with their obligations.

Here are some things worth checking.

1. Has anything been damaged?

Walk through the property carefully and look for any damage that was not there when you originally inspected it.

Check the walls, floors, windows, doors, kitchen benchtops and bathroom fittings. Look for broken glass, damaged carpets, water leaks or other obvious problems.

It is particularly important to look for damage that may have occurred while the vendor was moving out.

If you notice something concerning, take photographs and make a note of it. Your conveyancer can then help determine whether the issue needs to be raised with the vendor.

2. Are all the fixtures and fittings still there?

It is worth checking that the items included in the sale remain at the property.

Depending on your contract, these might include light fittings, ceiling fans, blinds, curtains, built-in wardrobes, heating and cooling equipment or kitchen appliances.

Do not assume that everything you saw during your first inspection is automatically included in the sale. Check the contract, including any special conditions and the list of inclusions and exclusions.

If something that should have remained has been removed, contact your conveyancer before settlement.

3. Has the vendor removed their belongings?

If your contract requires the vendor to provide vacant possession, the property should be vacated in accordance with the contract.

Check the garage, shed, cupboards and outdoor areas, not just the main living areas. It is not unusual to find unwanted furniture, garden waste or other items left behind.

If the property is being purchased subject to a tenancy, the position will be different. Your rights will depend on the terms of the contract and the agreed tenancy arrangements.

4. Are the services and appliances working?

Where possible, check that the lights, taps, toilets, hot water system and any appliances included in the sale appear to be working.

You should also check any garage remotes, heating and cooling systems and other items that form part of the purchase.

Keep in mind that a pre-settlement inspection is not a substitute for a professional assessment of the property’s condition. You should not attempt to test anything that would be unsafe to operate.

5. Check the outside as well

It is easy to spend the entire inspection inside the house and forget about the rest of the property.

Take a look at the yard, fences, driveway, garden sheds and other external areas. Check for new damage, rubbish or items that the vendor was required to remove.

If the property has a swimming pool or other additional features, check these areas as well.

What happens if you find a problem?

If you discover an issue, contact your conveyancer as soon as possible. Do not simply assume the vendor will fix it, and do not wait until after settlement to raise it.

Take photographs, describe the problem and explain why you believe it is inconsistent with the contract or the property’s condition when the contract was signed.

Your conveyancer can contact the vendor’s conveyancer to discuss the issue and determine what options are available.

Depending on the circumstances, this might involve asking the vendor to carry out repairs, return a missing item, agree to a price adjustment or retention or agree to another appropriate resolution. The appropriate course will depend on the contract and the nature and seriousness of the issue.

The important point is that not every problem gives a purchaser the right to delay settlement or refuse to settle.

For example, there may be a difference between damage that occurred after the contract was signed and a defect that was already present when you purchased the property. The terms of the contract and the particular circumstances will need to be considered.

Before agreeing to a proposed solution or taking any action that could affect settlement, speak with your conveyancer.

Can you refuse to settle if the property is damaged?

This is one of the questions purchasers often ask when a problem is discovered during the final inspection.

The answer depends on the nature of the damage, the vendor’s contractual obligations and the terms of the contract. For a dwelling that is so destroyed or damaged before possession as to be unfit for occupation, section 34 of the Sale of Land Act 1962 (Vic) may give the purchaser a statutory right to rescind by written notice within 14 days after becoming aware of the destruction or damage, subject to the Act and the particular circumstances.

A missing fixture, significant damage or a failure to provide vacant possession may raise contractual issues. However, it does not automatically follow that the purchaser can refuse to settle, and the available remedy will depend on the contract, the seriousness of the breach and any applicable statutory rights.

Withholding settlement funds or failing to settle without a proper legal basis can have serious consequences, including additional penalty interest, costs, loss of deposit and potential contractual claims. Any proposed retention, adjustment or postponement should be agreed in writing or supported by an express contractual or statutory right.

If you discover a significant problem, obtain advice before deciding how to proceed. Your conveyancer can assess the issue and explain the options available to you.

What if the vendor refuses to fix the problem?

If the vendor will not agree to rectify the issue, your conveyancer can consider whether the circumstances amount to a breach of contract and what remedies may be available.

Sometimes the parties can reach a practical agreement before settlement. For example, the vendor may agree to arrange repairs or the parties may negotiate another solution.

Any agreement should be properly documented. Do not rely on a verbal promise that something will be fixed after settlement.

If the issue is substantial, further legal advice may be necessary before you decide whether to proceed with settlement or pursue another remedy.

What if you only notice the problem after settlement?

Discovering a problem after settlement can make matters more difficult, particularly if the vendor has already vacated and the keys have been handed over.

That does not necessarily mean you have no rights. Depending on the circumstances, you may still have a claim arising from a breach of contract or another legal obligation.

If you discover an issue after settlement, take photographs, keep any relevant records and seek advice promptly.

Where possible, identifying and raising the issue before settlement gives you a better opportunity to discuss it with the vendor while the transaction is still being finalised.

A simple pre-settlement checklist

Before settlement, make sure you have:

  • Checked for new damage to the property.
  • Confirmed that the included fixtures and fittings remain.
  • Checked that the vendor has removed their belongings where required.
  • Looked through the garage, shed and outdoor areas.
  • Checked the operation of essential services and included appliances where practical.
  • Taken photographs of any concerns.
  • Contacted your conveyancer about any problems before settlement.

Don’t leave it until the last minute

A pre-settlement inspection may seem like a formality, particularly if the property appeared to be in good condition when you signed the contract. However, it is an important opportunity to identify problems before ownership changes hands.

Take your time, check the property against the contract and raise any concerns promptly.

If something does not look right, speak with your conveyancer before settlement. A little preparation can help avoid unnecessary disputes at what should be an exciting time.

If you would like help before settlement, find out more about our Melbourne conveyancing team or read our buying process guide.

About the Author

Amy Williams is a Licensed Conveyancer with 25 years of experience across all aspects of conveyancing. Having worked throughout New South Wales, she brings a wealth of knowledge and practical experience to every transaction. Amy is passionate about helping people achieve their property goals and particularly enjoys taking on complex or unique matters that require a little extra problem-solving.


Recent Posts